Advertisement
PULLEY
FIGURE 44
STEP 44
¯ To assemble the LEG CABLE (101) follow the cable routing as shown and use the following steps:
¯ SECURELY
attachthe LEG CABLE (10 i) to the LEG CURL/EXT (15)using one 3/8 X 1-1/4" BOLT (83), one 3/8"" WASHER
(91),
one 3/8" LOCK NUT (92). See FIGURE 44.
¯ Route the LEG CABLE (101) around the pulleys in the BASE (1) and through the floating pulley as shown in FI CURE
FIGURE 45
I
I
112
o
STEP 45
¯ Runthe LEG CABLE (101) throughthe
hole of the D-R/NO (7) and attach one
KE'~ff-IOLE CLE\-IS (66) ~.o the end
the LEG CABLE (101). See FIGURE 45.
t
1/2
1/2
I
Advertisement
