Advertisement
FIGURE 42
39
DETAIL 42
STEP 42
Securely assemble the ball end of the ~a23 CABLE (103) and one 3-112" PULLEY (42) to the FRONT UPRIGHT (25) using two 3/8
3/4" B6LTS (85), two 3/8" FLANGE SPACERS (49), two 3/8" WASHERS
(91), and V,vo 3/8" LOCKNUTS
(921). (NOTE:
CABLE (103) should be routed underneath the retaining bolt as shown in DETAIL 42.)
FIGURE 43
STEP 43
¯ Runthe AB CABLE (103) throughthe
floating pulley assembl?; then screw the
threaded end of AB CABLE (103) approxi-
mately 3/4 into the end of the PULLEY
BRACKET
(29) eaad tightenjamnut
securely as shown in FIGLrRE 43.
IMPORTA2qT!
lvi'ake sure the cables are
running in the grooves of all pulleys.
37
Advertisement
