Advertisement
1/2 X 4-1/2"
FIGURE 28
;TEP 28
¯ SECURELY assemble the BEAR~G HOUSING (6) and the CENTER PULLEY BRACKET (26) to the FRONI" UPRIGHT (25) using
1/2 X 4-1/2" BOLTS (89), four 1/2"' \VASHERS (93), and m'o 1/2" LOCKNUTS
(94). See FIGURE
¯ Attachtwo 1 X 1" GUIDES (53) to the ANGLE onthe UNDERSIDE of the BEARINGHOUSING
(6). See ]~GURE
~
3/8 X 2"
"
FIGURE 29
STEP 29
¯ LOOSELY
assemble t~vo 3-112" PULLEYS (42) to the
CENTER PIN ,1 ,EY BRACKET
(26) using two 3/8 X
BOLTS (84), two 2-3/8" L-BRACKETS
(45), four
WASHERS
(91), and two 3/8" LOCK Nl~q-5 (92).
FIGURE29.
(NOTE: This connection wil be tightened "after the
cable has been routed.)
2
6
Advertisement
