Lenovo ThinkSystem SR665 Setup Manual page 224

Hide thumbs Also See for ThinkSystem SR665:
Table of Contents

Advertisement

Step 1.
Touch the static-protective package that contains the new RAID super capacitor module to any
unpainted surface on the outside of the server. Then, take the new RAID super capacitor module
out of the package and place it on a static-protective surface.
Step 2.
Install the super capacitor module.
Figure 103. Super capacitor installation on the air baffle
a.
Open the retention clip on the holder.
b.
Put the super capacitor module into the holder.
c.
Press it down to secure it into the holder.
Step 3.
Connect the super capacitor module to an adapter with the extension cable that comes with the
super capacitor module. See "RAID super capacitor modules" on page 66.
Install a super capacitor module on the 2.5-inch middle drive cage
Use this information to install a super capacitor module the 2.5-inch middle drive cage.
About this task
Attention:
• Read "Installation Guidelines" on page 134 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Bz2XIeLEfGcrLGm9TSY_yt
• Youku:
http://list.youku.com/albumlist/show/id_52339612.html
Procedure
Step 1.
Touch the static-protective package that contains the new RAID super capacitor module to any
unpainted surface on the outside of the server. Then, take the new RAID super capacitor module
out of the package and place it on a static-protective surface.
Step 2.
Open the drive cage handle.
ThinkSystem SR665 Setup Guide
220

Advertisement

Table of Contents
loading

Table of Contents