Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
CAUTION:
Hazardous moving fan blades nearby.
Attention:
• Read "Installation Guidelines" on page 134 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Bz2XIeLEfGcrLGm9TSY_yt
• Youku:
http://list.youku.com/albumlist/show/id_52339612.html
Procedure
Step 1.
If there is a RAID super capacitor module installed on the air baffle, disconnect the RAID super
capacitor module cable first.
Step 2.
If there is a GPU installed on the air baffle, remove the GPU first.
Step 3.
(Only for GPU air baffle) Remove the air baffle fillers or extenders (if any).
Step 4.
Figure 52. Removal of the air baffle filler
ThinkSystem SR665 Setup Guide
156