Procedure
Step 1.
Touch the static-protective package that contains the new M.2 adapter and M.2 drive to any
unpainted surface on the outside of the server. Then, take the new M.2 adapter and M.2 drive out
of the package and place them on a static-protective surface.
Notes:
• The M.2 adapter is shipped with a loose screw, but the screw is not necessarily used for the
installation.
• The M.2 adapter you want to install might be different from the following illustrations, but the
installation method is the same.
Step 2.
Adjust the retainer on the M.2 adapter to accommodate the particular size of the M.2 drive you wish
to install. See "Adjust the retainer on the M.2 adapter" on page 203.
ThinkSystem SR665 Setup Guide
200