Step 3.
Install PCIe adapters.
Figure 92. PCIe adapter installation
Note: Carefully handle the PCIe adapter by its edges.
a.
Align the PCIe adapter with the PCIe slot on the riser card. Carefully press the PCIe adapter
straight into the slot until it is securely seated and its bracket also is secured.
b.
Rotate the PCIe adapter retention latch to the closed position.
Step 4.
Check the rearwall matrix and decide which rearwall brackets need to be installed or removed for
installing your riser assemblies. See "Rearwall bracket combinations matrix" on page 179,
"Rearwall bracket combinations matrix" on page 179 and "Install a B1/B2 rearwall bracket (middle)"
on page 181.
ThinkSystem SR665 Setup Guide
206