Table of Contents
Advertisement
Figure 85. Hot-swap drive installation
a.
Ensure that the drive tray handle is in the open position. Slide the drive into the drive bay until it
snaps into position.
b.
Close the drive tray handle to lock the drive in place.
Step 4.
Check the drive status LED to verify that the drive is operating correctly.
a.
If the yellow drive status LED is lit continuously, that drive is faulty and must be replaced.
b.
If the green drive activity LED is flashing, the drive is being accessed.
Step 5.
Continue to install additional hot-swap drives if necessary.
ThinkSystem SR665 Setup Guide
198
Advertisement
Table of Contents
