Redialing; Redial - Last-Dialed Number; Redial Programming (Storing Numbers) - Comdial Conversip EPI00G-L12 User Manual

Making Calls
Note: If you are already on a line, you must press SHIFT before dial-
ing the personal or system speed dial numbers that are stored at the
dial pad. Also, if a speed dials a preselected line that is in use, the
speed dial does not engage.
Note: On some systems, due to programming action, the available
system speed dial codes are *100 -*299 and *100 -*599.

3.4 Redialing

For instruction on using your system's Automatic Redial feature, see
Section 7.4, Automatic Redial.

3.4.1 REDIAL - LAST-DIALED NUMBER

To redial the last-dialed number, perform the following steps.
1. Press SPEAKER or hang up the handset to disconnect the cur-
rent ringing or busy tone.
2. Dial #.
3. Listen for a ringing or busy tone over the endpoint speaker.

3.4.2 REDIAL PROGRAMMING (STORING NUMBERS)

To permanently store a number you
have just dialed, choose one of
these methods:
• While the number is still
ringing, select MORE, then
select Save, or,
• Press an unused
programmable button
location.
44 Comdial Feb '05