Using Speed Dial; Using Last Number Redial - Comdial DXP Plus User Manual

GCA70-314
3.2

Using Speed Dial

To dial a speed dial number from a preprogrammed DSS
button,
1. Press preprogrammed button. If you programmed the number
at the second level of a DSS button, press HOLD before
pressing button.
2. When called party answers, lift handset.
To dial personal or system speed dial numbers from your
keypad,
1. Dial desired code:
0-9 = personal speed dial number,
100– 599 = system speed dial number.
If you are already on a line, press HOLD then dial code.
2. When called party answers, lift handset.
NOTE: On some earlier systems, the available speed dial codes are
100– 299.
3.3

Using Last Number Redial

To redial the last number that you dialed at your telephone,
1. Press SPEAKER (or hang up handset) to disconnect current
ringing or busy tone.
2. Dial #.
3. Listen for ringing or busy tone over the telephone's speaker.
When called party answers, lift handset, or if called party is
busy, press SPEAKER to disconnect.
Non-LCD Station User's Guide 3–3
Making Calls