Display Ip Trunk Card Status; Display Ip Trunk Card Port Status - Nortel 1000 Description, Installation And Operation Manual

OTM 2.1 (and later) OA&M using OTM 2.1 (and later) applications

Display IP trunk card status

To display the status of a indicated IP trunk card in LD 32, use the following
command:
STAT l s c

Display IP trunk card port status

To display the status of a port on the IP trunk card in LD 32, use the following
command:
STAT l s c u
Display the status of the indicated
IP trunk card, where: l = loop,
s = shelf, c = card
Display the status of the indicated
ITG port, where: l = loop, s = shelf,
c = card, u = unit.
IP Trunk Description, Installation, and Operation
Page 483 of 644