About This Document; Subject - Nortel 1000 Description, Installation And Operation Manual

About this document

Subject

This document is a global document. Contact your system supplier or your
Nortel Networks representative to verify that the hardware and software
described is supported in your area.
This document describes how to engineer, install, configure, administer and
maintain an IP Trunk 3.01 system.
IP Trunk 3.01 is an up-issue to the IP Trunk 3.0 and ITG Trunk 2.1
applications. It enhances Voice over Internet Protocol (VoIP) networking
capability to and from other Meridian 1 and Business Communication
Manager (BCM) systems and Communication Server 1000 systems.
Note: Interoperability with other Nortel Networks products and
applications may exist, but has not been verified by the IP Trunk design
group; for interoperability with other products, please refer to the
customer documentation associated with those products.
IP Trunk 3.01 also enables networking with CS 1000/1000M systems running
CS 1000 Release 4.0. (A CS 1000 system is a server-based, full-featured IP
PBX, fully distributed over IP LAN\MAN\WAN networks.)
The IP Trunk 3.01 application, building on the approach in IP Trunk 3.0,
provides a clean and easy way for customers to add a Meridian 1 system to a
CS 1000 network composed of other Meridian 1 systems, BCM, CS 1000
Release 4.0, or other supported endpoints.
IP Trunk Description, Installation, and Operation
Page 21 of 644