Trace And Alarm/Log - Nortel 1000 Description, Installation And Operation Manual

Page 528 of 644
Table 59
SNMP trap causing events (Part 2 of 2)
Command
Alternate Routing
Normal Service Restored

TRACE and ALARM/LOG

553-3001-363 Standard 2.00
Maintenance
Function
QoS prevents calls from being completed. Cause value
"Temporary failure" is sent to the system for Fallback to
PSTN.
Network performance is confirmed as acceptable and IP
telephony has been restarted.
Call Tracing (TRACE File Command)
This command interfaces with all modules to create an efficient TRACE File.
It is a monitor that stores and keeps track of information about events. For all
error conditions, a clear log of all actions is available. The TRACE File does
not solve these errors; it only indicates that there were errors and shows where
the errors originated. The TRACE File asks each module to report all events
and records the errors in order in a complete event log. Each event is marked
with a severity indicator.
LOG File
All hardware alarms, normal log messages, and severe events are logged in a
single LOG file.
September 2004