Nortel 1000 Description, Installation And Operation Manual page 535

Table 61
File transfer commands (Part 3 of 3)
Command
traceFilePut hostname,
username, password,
directory path, filename
Example:
currLogFilePut hostname,
username, password,
directory path, filename
Example:
prevLogFilePut hostname,
username, password,
directory path, filename
Example:
bootPFilePut hostname,
username, password,
directory path, filename
Example:
hostFilePut hostname,
username, password,
directory path, filename,
ITGFileName
Example:
Description
The traceFilePut task on the host starts an FTP session with the
given parameters and downloads the IP trunk card's call trace
file to the indicated location on the host.
ITG> traceFilePut "ngals042", "anonymous", "guest", "/trcDir",
"trcFile"
The logFilePut task on the host starts an FTP session with the
given parameters and downloads the IP trunk card's current log
file to the indicated location on the host.
ITG> currLogFilePut "ngals042", "anonymous", "guest",
"/currDir", "logFile"
The logFilePut task on the host starts an FTP session with the
given parameters and downloads the IP trunk card's previous
log file to the indicated location on the host.
ITG> prevLogFilePut "ngals042", "anonymous", "guest",
"/currDir", "logFile"
The bootpFilePut task on the host starts an FTP session with
the given parameters and downloads the IP trunk card's
BOOTP file to the indicated location on the host.
ITG> bootpFilePut "ngals042", "anonymous", "guest",
"/bootpDir", "bootpFile"
Transfer any file on the IP trunk card from location
ITGFileName and does a put using FTP to the host indicated by
hostname, username, password, and directory path.
Note: ITGFileName is the full path (that is, path/filename of
where the file is taken from on the IP trunk card).
ITG> hostFilePut "ngals042", "anonymous", "guest", "/hostDir",
"hostFile", "/C:/CONFIG/CONFIG1.INI"
IP Trunk
Maintenance
Description, Installation, and Operation
Page 535 of 644