Creating And Recalling Scenes - PRESONUS StudioLive III Series Owner's Manual

9 Master Control
9.6 Scenes and Projects
Saving a Project
Talk
Select Select Select Select Select Select
Solo Solo Solo Solo Solo
GEQ
Mute Mute Mute Mute Mute
Mute
Main
M1 Filters List Editor Scene Safe
Volume -84.00 dB
*Empty Location*
Auto Groups PROJECTS Traditional DCA SCENES Edit
Current Project: Laffitte's Cove Current Scene: Clementine Toledano
Groups
Laffitte's Cove QT and the Beasts
Drums Guitars
Store Store
Ida's Place Dark Harm
Backing Vocals
Rhythm Section
The Orpheum (Rehearsal) Derek Sharp (solo)
DCA 5 DCA 6
Saenger Stanley Gerard Tribute
Recall Recall
Archangel Tour DCA 7 Clementine Toledano DCA 8
*Empty Location* Voodoo Boogaloo
DCA 9 DCA 10
Reset Reset
*Empty Location* Bourdello
DCA 11 DCA 12
*Empty Location* Q and Fi
Filters List Editor Scene Safe
PROJECTS SCENES
Store
Current Project: Laffitte's Cove Current Scene: Clementine Toledano
Laffitte's Cove QT and the Beasts
Store
Ida's Place Dark Harm
The Orpheum (Rehearsal) Derek Sharp (solo)
Saenger Stanley Gerard Tribute
Recall
Archangel Tour Clementine Toledano
*Empty Location* Voodoo Boogaloo
Reset
*Empty Location* Bourdello
*Empty Location* Q and Fi
Loading a Project:
9.6.2

Creating and Recalling Scenes

1. To save a project, press the Scenes button.
Prev
AUX
Inputs
2. Tap the desired location for your new Project. You can select an Empty
DCA
Groups
Location or a previously used location. Selecting a previously stored Project
Mix/FX
Master
will overwrite the stored settings with the current settings.
Press the left Store button on the Touch Display to bring up the onscreen
3.
keyboard. Enter your Project name with the keyboard.
4. Press the Enter button to save your Project, or press the Cancel button on
the screen to cancel and return to the Projects Library screen.
Store
5. Once saved, the Current Project field will alert you that your Project has
Recall
been successfully saved and then display your new Project name.
Reset
6. The Store and Recall buttons will begin to flash. Use these buttons to create
a new Scene with your current mix parameters, or to recall a stored Scene
(if applicable). For more information on saving and recalling Scenes, see
Section 9.6.2.
1. Tap name of the desired Project.
2. Press the left Recall button on the Touch Display.
3. Once loaded, the Current Project field will display the Project name.
Creating a scene requires simply dialing in a mix that you would like to use at a later
date and saving it. This has obvious benefits for both studio and live sound. For
example, in the studio, saving and recalling a scene allows you to move to another
song and come back to the current mix later. For live shows with multiple bands, you
can set up custom mixes for each band at soundcheck and recall the mix when that
band goes onstage.
Scenes with the same Global routing and settings should be stored within the same
Project. This greatly decreases load time when switching between Scenes.
StudioLive™ Series III
Owner's Manual
90