PRESONUS StudioLive III Series Owner's Manual page 3

6 The Fat Channel - 43
6.1 Overview - 43
6.1.1 A/B Comparison for EQ
and Dynamics Settings - 44
Copy/Paste & Preset Load/Save - 44
6.1.2
Fat Channel Navigation - 46
6.2
6.3 Input Mode - 48
6.4 Gate Mode (Dynamic Fat Channel) - 50
6.4.1 Dynamic Fat Channel Controls - 50
6.5 Compressor Mode (Dynamic Fat Channel) - 51
6.5.1 Standard Compressor - 51
6.5.2 Tube Leveling Amplifier - 52
6.5.3 Class-A FET Compressor - 53
6.6 EQ Mode (Dynamic Fat Channel) - 54
6.6.1 Standard EQ - 54
6.6.2 Passive Program EQ - 55
6.6.3 Vintage 1970s EQ - 55
6.7 Aux Sends Mode (Dynamic Fat Channel) - 56
6.8 Fat Channel Screens - 57
6.8.1 Channel Overview - 57
6.8.2 Channel Settings Screen - 58
6.8.3 Gate Overview Screen - 59
6.8.4 Compressor Overview Screens - 60
6.8.5 EQ Overview Screens - 63
6.8.6 Aux Sends Overview Screen - 68
6.9 User Mode - 68
6.10 Input Controls - 68
6.10.1 Input Source - 68
6.10.2 Input Meters - 69
6.10.3 Input Source Routing - 69
6.10.4 Polarity and Phantom Power - 71
6.10.5 Stereo Link - 71
6.11 Output Assignment Buttons - 72
6.11.1 Main/Mono Bus Assignment
(StudioLive 64S only) - 72
6.11.2 Main/Subgroup Assignment (All 32-Channel
StudioLive Models) - 72
7 Tape Controls - 73
7.1 Pairing a Bluetooth Device - 73
8 SD Recording - 74
8.1 Creating a New Session for Recording - 74
8.2 Loading a Session for Playback - 75
Capture Screen - 75
8.3
Recording Status Messages - 76
8.3.1
Transport Controls - 77
8.3.2
8.4 Virtual Sound Check - 78
9 Master Control - 79
9.1 StudioLive Series III FLEX DSP Rack Effects - 79
The Effects Editor - 80
9.1.1
Effects Types - 80
9.1.2
Effects Presets - 85
9.1.3
9.4 UCNET - 86
9.4.1 Mixer Nickname - 86
9.4.2 Permissions - 86
9.4.3 Software Control - 87
9.4.4 Control Network IP Address
Settings - 88
Transport Controls - 88
9.4.5
9.5 DAW Button - 89
9.6 Scenes and Projects - 89
9.6.1 Creating and Recalling Projects - 89
9.6.2 Creating and Recalling Scenes - 90
9.6.3 Filters - 92
9.6.4 List Editor - 94
9.6.5 Scene Safe - 95
9.6.6 AutoStore - 95
Reset - 96
9.6.6
Nulling Parameters - 97
9.6.7