Loading A Session For Playback; Capture Screen - PRESONUS StudioLive III Series Owner's Manual

8 SD Recording
8.2

Loading a Session for Playback

8.2 Loading a Session for Playback
8.3

Capture Screen

When you've entered the artist name, performance name, or location for one Session,
it is saved for easy use in future sessions (up to 10 of each category at a time). Saved
designators can be easily selected by touching the drop-down menus in the right
column of controls on this page. Use the Master Control encoder to scroll through
choices.
Once you've entered the needed information for your new Session, touch Create in
the Touch Display to create the new session, or touch Cancel to cancel this operation
and exit the New Session screen. Once a new Session is created, the Capture screen is
shown on the Touch Display, and you can begin recording. For more information, see
Section 8.3.
When the Live Recording screen is displayed on the Touch Display, you can load a
previously recorded Session for playback or Virtual Soundcheck, by touching Load
Session on the Touch Display. This brings up the Load Session screen.
In this screen, you can select from a list of existing live recording Sessions on the
currently selected playback medium. Use the encoder below the Touch Display to
scroll through the list.
To load a session for playback:
• Touch the Session of your choice to select it. The Recall button flashes.
• Press Recall to load the Session.
• Once the Session is loaded, the Capture screen is shown, and you can begin
playback of your Session.
When the Load Mix button is active, the mix Scene stored with the session will also
load. The parameters that are loaded are filtered according to the settings in the
Scenes screen. For more information on creating and recalling mixer scenes, see
Section 9.6.2.
PreSonus Capture is a multitrack digital-audio recording application designed to
make recording with StudioLive mixers quick and easy. This application is built into
StudioLive Series III mixers, allowing you to track directly to an SD card using the
same high-quality audio engine as PreSonus' groundbreaking Studio One DAW.
Session files recorded on the SD Card can be opened directly in Studio One and
Capture – no conversion or exporting necessary.
Capture sessions recorded in Capture 3.0 on a computer using the USB audio
interface can be loaded onto an SD Card for playback later. For more information,
please review the Capture™ 3 Software Reference Manual.
StudioLive™ Series III
Owner's Manual
75