Passive Program Eq; Vintage 1970S Eq - PRESONUS StudioLive III Series Owner's Manual

Digital mix console / recorder with motorized faders
Hide thumbs Also See for StudioLive III Series:
Table of Contents

Advertisement

6
The Fat Channel
6.6
EQ Mode (Dynamic Fat Channel)
6.6.2

Passive Program EQ

Dynamic Fat Channel Controls
6.6.3

Vintage 1970s EQ

Dynamic Fat Channel Controls
When a bus is selected, the EQ has six bands. Use the Page navigation buttons to
navigate between Bands 1-4 and Bands 5-6.
Press the Processor button to turn the EQ on or off.
When the Passive EQ is selected, the following controls are available in the
Fat Channel:
1
2
3
LOW
LOW
LOW
Boost
Atten
Freq
0.00
0.00
30 Hz
1. Low Boost. Sets the level of boost applied around the chosen low frequency.
This control interacts nicely with the Low Attenuation control, allowing for
boosts in apparent bass energy while keeping overall bass energy within
optimal limits.
2. Low Attenuation. Sets the level of attenuation applied around the chosen low
frequency. This control interacts nicely with the Low Boost control, allowing
for boosts in apparent bass energy while keeping overall bass energy within
optimal limits.
3. Low Frequency Select. Sets the center frequency of the band covered by the
Low Boost and Low Attenuation controls.
4. High Boost. Sets the level of boost applied around the chosen high frequency.
5. High Bandwidth. Sets the Q (or width) of the effect of the high EQ band.
6. High Frequency. Sets the center frequency of the high EQ band.
7. High Attenuation. Sets the amount of attenuation applied in a shelving fashion
to frequencies at and above the chosen high frequency.
8. Attenuation Select. Sets the frequency at and above which the High
Attenuation control attenuates treble content.
Press the Processor button to turn the EQ on or off.
When the Vintage 1970s EQ is selected, the following controls are available in the Fat
Channel:
1
2
3
LOW
LOW
L-MID
Gain
Freq
Gain
0.00 dB
60 Hz
0.00 dB
1. Low Gain. Sets the amount of boost or cut to apply the low-frequency band of
this EQ.
2. Low Frequency. Sets the shelving frequency of the low-frequency band of this EQ.
4
5
6
7
HIGH
HIGH
HIGH
HIGH
Boost
Bndwdth
Freq
Atten
0.02
0.06
5 kHz
0.00
4
5
6
7
H-MID
L-MID
H-MID
HIGH
Freq
Gain
Freq
Gain
700 Hz
0.00 dB
4.8 kHz
0.00
StudioLive™ Series III
Owner's Manual
8
ATTN
Select
10 kHz
55

Advertisement

Table of Contents
loading

Table of Contents