Nulling Parameters - PRESONUS StudioLive III Series Owner's Manual

9 Master Control
9.6 Scenes and Projects
CHANNEL HIPASS
GAIN
0db OFF
PAN <C>
Source
Analog
9.6.7

Nulling Parameters

Talk
Prev
Select Select Select Select Select
Select
Solo Solo Solo Solo Solo GEQ
Prev Next
Mute Mute Mute Mute Mute Mute
Inputs Select Select
User Solo Solo
Mute Mute
Main
Mix
1 17 2 18
3 19 4 20
5 21 6 22
7 23 8 24
Talk
Prev
Select Select Select Select Select
Select
Solo Solo Solo Solo Solo
GEQ
GATE COMP HI PASS
Thresh Thresh Filter
-84.00 dB 0.00 dB 52 Hz
Mute Mute Mute Mute Mute Mute
Gate Comp
Their parameters will be set as follows:
Fat Channel Parameters
NOISE GATE LIMIT
STATE STATE
OFF OFF
RANGE N/A
ATK
5 ms
REL 0.7 ms
Key Src Off
Key Fltr Off
Mode Expand
Power User Tip: Before beginning any new mixing situation, we recommended you reset
your scene. This is the easiest way to ensure that there are no lingering parameter settings
that could cause you some trouble in your new mix.
To return any Fat Channel parameter to its default setting, simply press and hold
the Shift button and turn its encoder.
Next
For example, if you want to null the current setting for the Channel 1 pan:
AUX
Inputs
1. Select Channel 1.
DCA
Groups
Mix/FX
Master
Select Select
Solo Solo
Mute Mute
2. Press and hold the Shift button.
Next
AUX
Inputs
3. Simultaneously turn Encoder 7: Compressor Threshold in the Fat Channel.
DCA
Groups
EQ EQ
Gain Freq The compressor threshold for Channel 1 will return to its default setting.
0.00 dB 1.42 kHz
Mix/FX
Master
Power User Tip: Parameters on 32-channel StudioLive Series III models can also
be nulled by holding the TAP button.
COMPRESSOR EQ
THRESH
0 dB STATE
RAT 2:1 P/S
ATK
20 ms Q
REL 150 ms FREQ
GAIN 0 dB GAIN
MODE Standard MODE
StudioLive™ Series III
Owner's Manual
LOW L.MID H.MID
OFF OFF OFF
PEAK n/a n/a
0.6 0.6 0.6
130 Hz 320 Hz 1.4 kHz
0 dB 0 dB 0 dB
Standard
HIGH
OFF
PEAK
0.6
5 kHz
0 dB
97