Table Of Contents - PRESONUS StudioLive III Series Owner's Manual

Table of Contents

1 Overview - 1
1.1 Introduction - 1
1.2 About this Manual - 1
1.3 Companion PreSonus Products - 2
1.4 What's in the Box - 3
Additional Resources - 4
1.5
2 Getting Started - 5
2.1 Level Setting Procedure - 5
2.2 Useful Concepts - 9
2.2.1 Select Buttons and the Fat Channel - 9
2.2.2 Fat Channel Plugins - 10
2.2.3 FlexMixes - 10
2.2.4 Fader Layers - 10
2.2.5 DCA Groups - 11
2.2.6 Recording and Playback - 11
2.2.7 Digital Patching - 11
2.2.8 Projects, Scenes, and Presets - 11
2.2.9 User Profiles - 12
3 Hookup - 13
3.1 Rear Panel Configurations - 13
3.1.1 StudioLive 64S - 13
3.1.2 StudioLive 32S - 13
3.1.3 StudioLive 32SX - 14
3.1.4 StudioLive 32SC - 14
3.1.5 StudioLive 32 (Blue Model) - 15
3.1.6 StudioLive 24 (Blue Model) - 15
3.1.7 StudioLive 16 (Blue Model) - 15
Rear Panel Connections - 16
3.2
Analog Inputs - 16
3.2.1
Analog Outputs - 17
3.2.2
Digital and Networking - 18
3.2.3
Power - 19
3.2.4
3.3 Top Panel Connections - 19
3.4 Typical Band Setup Diagrams - 20
3.5 Typical Church Setup Diagrams - 21
4 Basic Mix Functions Overview - 22
4.1 Channel Strip Basics - 22
4.2 Fader Layers and Banks - 23
4.2.1 User Fader Layer - 24
4.3 Filter DCA Groups - 25
4.3.1 Creating Filter DCAs - 25
4.3.2
Editing or Deleting
a Filter DCA Group - 26
4.3.3 Managing DCA Group Masters - 26
4.3.4 DCA Group Options - 27
4.4 Main Meters - 27
4.5 Talkback System - 27
Talkback Edit Screen - 28
4.5.1
5 Buses and Routing - 29
5.1 FlexMixes - 29
5.2 Aux Mixes - 30
Pre/Post Channel Sends - 31
5.2.1
Creating Aux Mixes - 31
5.2.2
5.2.3 Working with External Effects
Processors - 32
5.3 Subgroups - 33
5.3.1 Creating a Subgroup - 34
5.3.2 Fixed Subgroups
(32-channel models only) - 34
5.3.3 Creating Instrument Subgroups - 35
5.4 Matrix Mixes - 37
5.4.1 Creating a Matrix Mix - 37
5.4.2 Creating a Front Fill Mix - 38
5.5 FX Buses - 38
Creating Internal Bus FX Mixes - 39
5.5.1
5.6 Main Mono/Center Bus
(StudioLive 64S only) - 39
5.6.1 Mono Bus Mode - 40
5.6.2 LCR Mode - 41