Gate Overview Screen - PRESONUS StudioLive III Series Owner's Manual

6 The Fat Channel
6.8 Fat Channel Screens

Gate Overview Screen

6.8.3
While Gate is active in the Fat Channel, the Touch Display displays the Gate Overview
screen, displaying every Gate parameter available, along with useful metering and a
graphical representation of the effect of current settings. Touching any onscreen
knob allows you to use the Master Control encoder to set the selected parameter.
Touching a drop-down selector (such as Key Source) lets you select from a list of
relevant choices. Use the Master Control encoder to scroll through choices. Touching
onscreen buttons toggles the related parameter on or off.
Power User Tip: For StudioLive models with dynamic Fat Channel displays, many of these
parameters can also be controlled from the encoders and buttons in the Fat Channel. See
Section 6.4.1 for details.
1 2
18
17
16
15
14
1. Signal Source. Displays whether this channel is receiving signal from an
analog or digital source. Press to open the Digital Patching screen. For more
information, see Section 12.3.
2. Settings Button. Touch to access additional channel settings.
3. Channel Name and Number. Displays currently selected channel name and number.
4. Current Parameter. Displays currently controlled parameter and its value.
5. Presets. Opens the Preset Library. See Section 5.9 for more information.
6. Key Source (Input Channels only). The encoder sets and the scribble strip
displays the input signal that will trigger the gate. This method of triggering
a dynamics processor is often called sidechaining. Set to "None" to disable
sidechaining. For more information on Sidechaining, see Section 13.8.
Note: Because the StudioLive 64S employs the quad-core FLEX DSP engine, any of
the first 32 channels can be used a Key Source for channels 1-32 while any of the
second 32 channels can be used as a Key Source for channels 33-64.
7. Key Filter. Sets the Key Filter frequency.
8. Key Listen. Touch to enable the Key Listen function.
9. Gate / Expander Toggle. Toggles the function of the processor between Gate or
Expander.
10. Output Meter. Displays the post-Gate signal level.
11. Gain Reduction Meter. Displays the amount of Gain Reduction applied by the
Gate to the channel.
12. Graph. Displays the Gate curve.
13. Input Meter. Displays the pre-Gate signal level.
14. Release. Sets the Release time for the Gate/Expander.
15. Attack. Sets the Attack time for the Gate/Expander.
16. Range. Sets the Range for the Gate.
17. Threshold. Sets the Threshold for the Gate/Expander.
18. Gate On/Off. Turns the Gate on or off for the current channel or bus.
Power User Tip: Use the Tap or Shift buttons to "null" button any parameter by pressing
and holding the Tap or Shift buttons while adjusting the control of your choice to return
that control to its default setting.
3 4
5
6
7
8
9
StudioLive™ Series III
Owner's Manual