Table of Contents
Advertisement
WiFi
Control the networking of your tumble
dryer.
– Setup
This message only appears if the
tumble dryer has not yet been
connected to a WiFi network.
– Deactivate (visible when the network
is activated)
The network remains set up; the WiFi
function is switched off.
– Activate (visible when the network is
deactivated)
The WiFi function is reactivated.
– Connection status (visible when the
network is activated)
The following values are displayed:
– The quality of WiFi reception
– The network name
– The IP address
– Reset (visible when set up)
Resets the WiFi login (network) to
immediately re-establish a new
connection.
– Reset (visible if already set up)
The network is no longer set up. A
new connection has to be
established in order to use the
network again.
– The WiFi is switched off
– The WiFi connection will be reset
to the factory default setting
Supervisor level
Network time
The date and time can be
synchronized over the network.
– Off
The date and time are not
synchronized over the network.
– As master
The machines are in a network but
are not connected to the Internet. A
machine is declared as the master
and sends data to the slave
appliances.
– As slave
The machines are in a network and
are connected to the Internet. All
machines are configured as slaves.
Data is synchronized over the
Internet.
89
Advertisement
Table of Contents
