Miele PDR 908 EL Operating And Installation Instructions page 83

Special programs
You can put together 5 special
residual-moisture or time-controlled
programs and assign your own
program names.
First, enter the program name.
 Select the special program you want
to change.
The Save as menu opens.
 Use the letters and symbols below
the line to enter the name.
 Touch the
Save
You can now enter the parameters for
a  Res. moisture
program or  Timed drying.
The 5 special programs are pre-
programmed at the factory. You can
change these special programs.
The special programs are added to the
program packages. Enter the name
and settings of your special program
into the "Special programs" table in
the "Program overview" chapter.
Res. moisture program
– Final residual moisture:
- 6% (dry) – 40% (damp)
– Extra drying time:
0–60 minutes
– Temperature (Process air):
cold – 140°F (60°C)
– Holding phase
– Holding time:
0–60 minutes
– Holding temperature (Process air):
cold – 140°F (60°C)
sensor control.
Supervisor level
– Cooling down temp. (Process air):
104-131°F (40–55°C)
– Anti-crease
– Drum rotation main direction:
0–500 seconds
– Pause:
100–3000 seconds
– Drum reversal:
0–500 seconds
Timed drying
– Running time:
1–120 minutes
– Temperature (Process air):
cold – 140°F (60°C)
– Cooling down temp. (Process air):
104-131°F (40–55°C)
– Anti-crease
– Drum rotation main direction:
0–500 seconds
– Drum reversal:
0–500 seconds
– Pause:
100–3000 seconds
83