Table of Contents
Advertisement
Supervisor level
Clean the filters
The lint filter in the air-supply area
must be cleaned on a regular basis.
You can set an hourly interval for the
reminder.
The selected hourly interval depends on
how much lint tends to build up and
how often you wish to clean the filter,
e.g., for hygiene purposes.
You can adjust this reminder:
filters
– Time interval of 5–55 hours
– Factory default: after 55 hours
– Off
86
Service interval
The tumble dryer shows a custom
message at a selected interval to
prompt you to undertake specific
maintenance tasks.
3 different messages can be created:
1/2/3. Each message is created in the
language and alphabet of the current
supervisor language.
Your message is displayed at the end of
Clean the
the program and can be acknowledged
with
the end of the next program.
Settings
This setting allows you to determine the
interval (by hours or date) at which the
message appears.
– Factory default: Off
– By time
You can then select a time interval
from 1–9999 hours.
– By date
You can enter a date.
Message text
Enter your message for your planned
maintenance work. You can edit one,
two, or all three of the 1/2/3 messages.
Resetting the display
The message appears until the display
is permanently reset. The message then
appears again once the next interval is
reached.
OK
. The same message appears at
Advertisement
Table of Contents
