Table of Contents
Advertisement
Supervisor level
Peak load signal
External hardware is connected via the
Miele XCI Box.
The peak-load negotiation function
enables the tumble dryer to be
connected to an energy-management
system. When a signal is registered,
the tumble dryer's heater is switched
off for a short period or the appliance
is prevented from being switched on.
The tumble dryer may only be
operated with a peak-load system if
this system is connected to the tumble
dryer via the Miele XCI Box.
– Factory default: No function
– Peak load with 230 V
– Peak load with 0 V
Peak load prevention
With this function, the application of a
hygiene program is not amended
when a peak-load signal is in place.
The heater stays switched on.
– Factory default: Off
– On
88
Select KOM module
This tumble dryer is equipped with an
integrated WiFi module. However, the
tumble dryer can also be equipped
with an external module.
– Off
– Internal module (factory default)
The internal WiFi module is used.
– External module
An XKM module or RS232 module is
inserted into the module slot.
Advertisement
Table of Contents
