Table of Contents
Advertisement
Clock display
After selecting the clock format, you
can set the time of day.
Clock format
– Factory default: 24-hour display
– 12-hour display
– No clock
Set
– The time can be set.
Date
The date can be set after selecting the
date format.
– Date format
The date can be shown starting with
the day, month, or year.
– Date
The date is set.
Supervisor level
Volume
The volume for various sounds can be
changed.
The volume can be changed.
– Finish tone
– Keypad tone
– Welcome tone
– Fault alarm
The volume cannot be changed here.
Res. moisture display
In addition to displaying the drying
level, the residual moisture can also
be indicated as a percentage.
– Factory default setting: Without %
value
– With % value
Visibility parameters
Various parameters are offered/
displayed when a program is selected.
You can decide which parameters
should not be displayed. These
parameters can then not be edited
during program selection.
– Residual moisture
– Duration
– Low temperature
– Anti-crease
– Load size
77
Advertisement
Table of Contents
