Table of Contents
Advertisement
Installing plug-in pipes
The tumble dryer is supplied with a
connector for installing a pipe. It can
be beneficial to use plug-in pipes if the
total duct length is long. A pipe
generates less resistance against the
exhaust air than a highly flexible
exhaust-air hose, for example. This
has a positive effect on the time and
energy needed for drying.
You will need
– The connector provided
– A wall pipe* or a window connection*
(* optional accessories)
– A plastic waste-water pipe from a
specialist retailer If the required pipe
diameter is over 4" (100 mm),
additional adapter pipes are needed
for the pipe system (e.g., from 4" to
5" (100 mm to 125 mm).
Insert the connector (2) into the
exhaust-air outlet.
Install the pipe (1).
Installing the ducting
Example
a Wall pipe (installation instructions
are provided with the Miele Wall
Pipe)
b Connector
c Plastic waste-water pipe,
diameter DN 100
69
Advertisement
Table of Contents
