Table of Contents
Advertisement
Installation
Ensure that no closeable door,
sliding door, or an oppositely hinged
door is installed that would hinder
the door of the dryer being opened in
any way.
Leveling the tumble dryer
The tumble dryer must stand perfectly
level to ensure safe and proper
operation.
The screw feet can be adjusted to
compensate for unevenness in the floor.
This tumble dryer is not suitable for
building under.
Installation and connection
Never block the ventilation slots on
the tumble dryer. Do not block the
gap between the bottom of the
tumble dryer and the floor with toe-
kicks, deep pile carpet, etc. This
would hinder a sufficient flow of air
to the tumble dryer.
Damage caused by incorrectly
installed or missing ducting.
Moist air from the tumble dryer can
cause damage in the room where the
appliance is installed.
Please observe the instructions in
"Installing the ducting".
External control equipment
The XCI box accessory is needed to
connect external control equipment.
63
Advertisement
Table of Contents
