Extron electronics SW HD 4K PLUS Series User Manual page 36

Command
Verbose Mode
Set verbose mode
View verbose mode
X1@
KEY: = Verbose mode
Resetting
Reset all device settings to
factory defaults
IP system reset
Reset all settings except IP
settings
Absolute system reset
The factory configured passwords for all accounts on this device have been set to the device serial number. In the
NOTE:
event of an absolute system reset, the passwords convert ot the default, which is no password.
IP Configuration
NOTE: After adjusting any IP setting, enter the network reboot command
Set date and time
24
NOTE: When power is cycled to the unit, the date and time are reset to the factory default values.
View date and time
Set IP address
24
X1(
KEY: = Local date and time (to set)
X2)
= Local date and time (displayed)
X2!
= IP address
ASCII Command Response
(Host to Switcher) (Switcher to Host)
EX1@ }
CV Vrb
E } X1@]
CV
In verbose modes 2 and 3:
Vrb
0 = None (default for IP connection)
1
= Verbose mode (default for USB and RS-232 connections)
2
= Tagged responses for queries
3 = Verbose mode and tagged responses for queries
See the Verbose mode symbol definition
E }
ZXXX Zpx
E }
1ZQQQ Zpq1
E }
ZY Zpy
E }
ZQQQ Zpq
Ipt
EX1( }
CT
E } X2)]
CT
In verbose modes 2 and 3:
Ipt
Ipi
EX2! }
CI
MM/DD/YY-HH:MM:SS
Format
Ddd, DD Mmm YYYY HH:MM:SS
Format
nnn.nnn.nnn.nnn
Format
SW HD 4K PLUS Series • Remote Configuration and Control
Additional Description
X1@]
Set the verbose mode to
View current verbose mode
X1@]
] Reset product-specific settings to
factory default values. Does not
affect IP settings or user files.
] Reset only IP settings to factory
values.
] Reset all device settings to
factory defaults except IP
settings (communication is
preserved). This command
is recommended for after a
firmware update.
] Reset all device settings to
factory default except firmware
version.
E 2BOOT }
for the command to take effect.
X2)]
• Set date and time
format
month/day/year-hour/
(
minutes/seconds
Example:
In this example, the date is
June 22, 2017, and the time is
10:07 and 14 seconds.
The unit responds with
Show current date and time
in the format:
X2)]
Ddd, DD Mmm YYYY HH:MM:SS
X2!]
• Set IP address
X1@
.
X1@
.
for details on these modes.
X1(
in the
MM DD YY HH MM SS
/ / - : :
)
06 22 17 10 07 14
/ / - : : .
X2)
.
X2)
X2!
.
28