Extron electronics SW HD 4K PLUS Series User Manual page 33

Command
HDCP Commands
HDCP Status
View HDCP status for an
input
View HDCP status for all
inputs
View output HDCP status
HDCP Input Authorization
HDCP authorization per
input
Enable or disable HDCP
authorization for all inputs
View HDCP authorization
status for all inputs
Output HDCP Mode
Set the output HDCP mode
View the output HDCP mode
X!
KEY: = Input number
X@
= Enable or disable HDCP
X1%
= Input HDCP status
X1^
= Output HDCP status
X1&
= Output HDCP mode
ASCII Command Response
(Host to Switcher) (Switcher to Host)
E X! } X1%]
I HDCP
In verbose modes 2 and 3:
Hdcp I
E } X1%
IHDCP
In verbose modes 2 and 3:
Hdcp I X1%
E } X1^]
OHDCP
In verbose modes 2 and 3:
Hdcp O
E X! X@ } Hdcp E X! * X@]
E * HDCP
E X@ } Hdcp E X@]
E HDCP
E } X@
EHDCP
In verbose modes 2 and 3:
Hdcp
E X1& } Hdcp S X1&]
S HDCP
E } X1&]
SHDCP
In verbose modes 2 and 3:
Hdcp S
1 through the highest numbered input on the unit (2 through 8,
depending on the model)
0 = Disable HDCP authorization,
authorization
0
= No source detected,
2
= Source without HDCP detected
0
= No sink detected,
2
= Sink without HDCP detected
0 = (Default) Encrypt as required by input:
For HDMI sinks, perform continuous trials.
For DVI sinks, attempt for 10 seconds, then fail.
1
= Always encrypt:
For HDMI sinks, perform continuous trials.
For DVI sinks, attempt for 10 seconds, then fail.
2
= Encrypt as required by input: continuous trials for HDMI and DVI
sinks.
3
= Always encrypt: continuous trials for HDMI and DVI sinks.
SW HD 4K PLUS Series • Remote Configuration and Control
Additional Description
Show HDCP status
X!
X1%]
X!
number of inputs
...
X1% X1%]
• • •
Show HDCP status
inputs.
X1% ... X1%]
• • •
Show HDCP status
output.
X1^]
Set HDCP authorization for input
X!
Set HDCP authorization to
all inputs.
...
X@ X@] View the current HDCP
• • •
authorization setting
inputs.
...
X@ X@ X@]
E • • •
Set the output HDCP mode to
X1&
View HDCP mode
output.
X1&]
1
= Enable HDCP authorization (default)
1
= Source with HDCP detected,
1
= Sink with HDCP detected
X1%
for input
.
1 maximum
= through {
}.
X1%
for all the
X1^
for the
X@
to .
X@
for
X@
for all the
.
X1&
for the
25