Extron electronics SW HD 4K PLUS Series User Manual page 32

Command
Auto‑input Switch Mode (continued)
Set time-out duration for
mode 2
View mode 2 timeout duration
X(
= Auto-input switch mode 2
KEY:
timeout duration
Video Color Bit Depth
Set video color bit depth
mode
View video color bit depth
mode
X#
KEY: = Video color bit depth mode
Signal Status
Request status of all signals
X@
KEY: = Input and output signal status
Output 5 V Mode
Set output 5 V mode
View output 5 V mode status
X1$
KEY: = Output 5 V mode
Front Panel Lockout (Executive Mode)
Enable or disable lock mode
Query lockout status
X@
KEY: = Front panel lock mode
ASCII Command Response
(Host to Switcher) (Switcher to Host)
E X( }
T AUSW Ausw T
E } X(]
T AUSW
In verbose modes 2 and 3:
Ausw T
1 250
- = Number of seconds the switcher delays before switching to the
most recently selected input.
0
= Immediate switch (no delay)
E X# }
V BITD Bitd
E } X#]
V BITD
In verbose modes 2 and 3:
Bitd
0 = Automatically truncate based on the EDID of the connected output
(default)
1 = Force truncation to 8-bit
E } X@
LS
In verbose modes 2 and 3:
Sig
0 = no signal detected (default), 1 = signal detected
E M X1$ HPLG }
Hplg M
E MHPLG } X1$]
In verbose modes 2 and 3:
Hplg M X1$]
0 = Auto: 5 V is enabled only when a source with 5 V is present.
1 = 5 V is always enabled (default).
X@
X Exe
X@]
X
In verbose modes 2 and 3:
Exe
0 = lock mode off (default), 1 = lock mode on
SW HD 4K PLUS Series • Remote Configuration and Control
Additional Description
X(]
Set the number (
0
(
before switching to the most
recently applied input.
0
= immediate switch (no delay)
View the mode 2 timeout
X(]
V X#]
Select color bit depth mode
View the video color bit depth.
V X#]
X@ X@ X@ X@]
• •...• • * View signal status
followed by the output (
X@ X@ X@ X@]
• •...• *
X1$]
Select output 5 V mode
View current output 5 V mode.
X@]
Select front panel lock mode
Show executive mode status.
X@]
X(
) of seconds
250
- ) the switcher delays
X(
.
X#
.
X@
of all inputs,
* X@
).
X1$
.
X@
.
24