Extron electronics SW HD 4K PLUS Series User Manual page 35

Command
Information Requests
Request information
Query model name
Query model description
Query part number
Query firmware version
Example:
View EDID in hex format
View EDID native resolution
Example
X!
KEY: = Input number
X@
= Audio mute status
X%
= Current EDID information in hex
X^
= Current EDID native resolution and refresh rate
X*
= Auto-input switch mode
X(
= Auto-input switch mode 2
timeout
X1#
= Video mute status
X3^
= Switcher part number
ASCII Command Response
(Host to Switcher) (Switcher to Host)
I
In
1I
SW
In verbose modes 2 and 3:
Inf01*
2I
HDMI•SWITCHER
In verbose modes 2 and 3:
Inf02*
N
60-
X(]
Q
Q
1.01
E X! } X%]
R EDID
In verbose modes 2 and 3:
X! X%]
E X! } X^]
N EDID
E X! }
N EDID 1600x1200 @ 60.0 Hz
1 through the highest numbered input on the unit (2 through 8, depending
on the model)
0
= Unmuted,
128 or 256 bytes of raw hex data
0
= Disabled — Manual switching (default)
1 = User-defined priority mode — The switcher selects the input to which
the user assigns priority. If no priority is assigned, the switcher selects
the active input with the highest number.
2
= Input memory priority mode — The switcher selects the most recently
applied input, and retains a history of the order in which active inputs
are connected to the unit. If an active input is removed, the switcher
switches to the most recently prioritized input.
1 250
- = Number of seconds the switcher delays before switching to the
most recently applied input.
0
= Immediate switch (no delay)
0 = Unmuted (default),
2
SW HD 4K PLUS:
SW4 HD 4K PLUS:
SW6 HD 4K PLUS:
SW8 HD 4K PLUS:
SW HD 4K PLUS Series • Remote Configuration and Control
Additional Description
X! X* X@ X1#]
•Ausw •Afmt •Vmt
View selected input
switch mode
status
X1#
n • ]
•HD•4K PLUS•Series
n •
SW •HD•4K PLUS•Series
Show the switcher model name.
SWn
n
•SUPPORT•4K60
n
HDMI•SWITCHER •SUPPORT•4K60
Show the switcher signal type,
number of inputs, and 4K support.
SWITCHER
on the unit (2, 4, 6, or 8).
nnnn nn ]
- Show part number
switcher.
Show firmware build number
to the second decimal place.
]
View the current EDID assignment
for input
(128 or 256 bytes).
X%
hex.
Show native resolution and refresh
rate
applied to input
]
1
= Muted
1 2
= Muted, = Video and sync muted
60-1603-01
60-1604-01
60-1605-01
60-1606-01
X!
, auto-input
X*
, Audio mute
X@
, and video mute status
.
]
SW2 SW4 SW6 SW8
= , , , or .
]
]
n
= number of inputs
X3^
of the
X(
,
X!
in hexadecimal
= current EDID information in
X^
of the EDID currently
X!
.
27