WEIDER CLUB C725 User Manual page 8

2. Attach the Seat (33) to the Bench Frame (1) with
four M6 x 20mm Screws (122).
3. Attach the Front Leg (3) to the Bench Frame (1)
with two M10 x 110mm Screws (117) and two M10
Washers (83).
See step 1. Tighten the M10 Nylon Locknuts
(116).
4. Apply some of the included grease to an M10 x
170mm Bolt (123). Attach the Backrest Post (7) to
the Backrest Frames (8) with the Bolt, two M10
Washers (83), and an M10 Nylon Locknut (116).
Do not tighten the Nylon Locknut yet.
Next, attach the Backrest (32) to the Backrest
Frames (8) with four M6 x 40mm Screws (140)
and four M6 Washers (142). Do not tighten the
Screws yet.
2
33
122
3
83
117
83
3
4
32
123
Grease
83
8
142
140
8
1
122
1
142
140
83
116
7