WEIDER CLUB C725 User Manual page 16

23. Attach the Top Frame (17) to the Left Rear
Upright (12) with two M10 x 62mm Bolts (96), two
M10 Washers (83), and two M10 Nylon Locknuts
(116). Do not tighten the Nylon Locknuts yet.
Make sure that the heads of the Bolts are
inside the Left Rear Upright.
Attach the Top Frame (17) to the Right Rear
Upright (60) in the same way.
24. Attach the left Barbell Guide (25) to the Top
Frame (17) with an M10 x 65mm Button Bolt (66),
two M10 Washers (83), a 13mm Spacer (108),
and an M10 Nylon Locknut (116). Do not tighten
the Nylon Locknut yet.
25. Orient the Weight Carriage Frame (18) as shown.
Attach the Weight Carriage Frame to the Top
Frame (17) with an M10 x 80mm Bolt (147), two
M10 x 65mm Button Bolts (66), five M10 Washers
(83), and three M10 Nylon Locknuts (116). Do
not tighten the Nylon Locknuts yet. Make sure
that the head of the M10 x 80mm Bolt (147) is
inside the Weight Carriage Frame.
23
60
24
116
25
25
116
17
16
17
83
83
116
12
17
83
108
83
66
25
18
147
83
Welded
83
Tube
83
66
116
96
96