WEIDER CLUB C725 User Manual page 17

26. Attach the Weight Carriage Frame (18) to the
Center Upright (13) with two M10 x 85mm Button
Bolts (125) and two M10 Washers (83). Do not
tighten the Button Bolts yet.
27. Attach the Weight Carriage Frame (18) to the
Weight Carriage Upright (21) with two M10 x
75mm Button Bolts (130) and two M10 Washers
(83).
See steps 11–26. Tighten all screws, bolts,
and nylon locknuts used in these steps.
See the inset drawing. Attach the Foot Plate
(15) to the Rear Base (9) with two M10 x 70mm
Button Bolts (97).
28. Attach the Arm Frame (24) to the Center Upright
(13) with two M10 x 70mm Button Bolts (97), two
M10 Large Washers (39), and two M10 Nylon
Locknuts (116).
26
27
15
28
97
17
125
83
83
18
13
18
83
21
97
9
39
116
13
24
130