WEIDER CLUB C725 User Manual page 14

18. Press the Weight Bumper (30) down onto the
Weight Carriage Base (20).
Next, attach the Weight Carriage Upright (21) to
the Weight Carriage Base (20) with two M10 x
85mm Button Bolts (125). Do not tighten the
Button Bolts yet.
19. Orient the Weight Carriage (19) as shown, and
slide it onto the Weight Carriage Upright (21).
20. Insert one of the Barbell Guides (25) into the left
Side Base (14). Attach the Barbell Guide with an
M10 x 65mm Button Bolt (66), two M10 Washers
(83), a 13mm Spacer (108), and an M10 Nylon
Locknut (116).
Attach the other Barbell Guide (25) to the right
Side Base (14) in the same way.
18
19
20
25
14
14
21
30
20
19
21
11
25
116
83
108
83
125
14
66