15. Orient the Center Upright (13) as shown. Attach
the Center Upright to the Rear Base (9) with two
M10 x 85mm Button Bolts (125), two M10
Washers (83), and two M10 Nylon locknuts (116).
Do not Tighten the Nylon Locknuts yet.
16. Attach the Weight Carriage Base (20) to the Rear
Base (9) with two M10 x 75mm Button Bolts (130)
and two M10 Washers (83). Do not tighten the
Button Bolts yet.
17. Orient the Weight Bumper (30) as shown, and
slide it downward onto the Weight Carriage
Upright (21).
Next, orient the Weight Carriage Upright (21) as
shown, and insert it into the Weight Carriage
Base (20). Then, press the Upright Foot (29) onto
the Weight Carriage Upright.
15
9
16
130
17
13
13
125
125
83
116
9
20
83
83
30
Welded
Washers
20
21
29