WEIDER CLUB C725 User Manual page 26

51. Wrap the Rear Cable (94) under a Small Pulley
(74). Attach the Small Pulley, a Small Cable Trap
(93), and two Half Pulley Guards (91) at the holes
closest to either end of the two Pulley Plates (92)
with an M10 x 52mm Button Bolt (135) and an
M10 Nylon Locknut (116). Make sure that the
Small Cable Trap and the Half Pulley Guards
are oriented as shown.
52. Attach the Rear Cable (94) inside the Weight
Carriage Frame (18) with an M10 x 65mm Button
Bolt (66), two M10 Washers (83), and an M10
Nylon Locknut (116).
53. Identify the Low Cable (80). Route the threaded
end of the Low Cable through the Foot Plate (15)
and the Center Upright (13).
Wrap the Low Cable (80) under a 115mm Pulley
(146). Attach the 115mm Pulley inside the Center
Upright (13) with an M10 x 65mm Button Bolt
(66), two M10 Washers (83), two 12.5mm
Spacers (138), and an M10 Nylon Locknut (116).
51
52
53
116
83
138
15
80
26
116
94
74
93
91
91
135
92
83
116
18
83
66
94
146
13
138
83
66