WEIDER CLUB C725 User Manual page 27

54. Wrap the Low Cable (80) over a Small Pulley
(74). Attach the Small Pulley and two Half Pulley
Guards (91) to the Double "U"-bracket (98) with
an M10 x 45mm Button Bolt (131) and an M10
Nylon Locknut (116). Make sure that the Half
Pulley Guards are oriented as shown.
55. Route the Low Cable (80) through the Weight
Carriage Base (20) as shown. Attach two Small
Pulleys (74) inside the Weight Carriage Base with
two M10 x 65mm Button Bolts (66), four M10
Washers (83), four 12.5mm Spacers (138), and
two M10 Nylon Locknuts (116).
56. Wrap the Low Cable (80) over a Small Pulley
(74). Attach the Small Pulley, a Small Cable Trap
(93), and two Half Pulley Guards (91) at the low-
est holes in the two Pulley Plates (92) with an
M10 x 52mm Button Bolt (135) and an M10 Nylon
Locknut (116). Make sure that the Small Cable
Trap and the Half Pulley Guards are oriented
as shown.
54
116
55
116
83
138
56
27
98
91
91
131
74
80
80
83
138
116 74
74
138
83
138
20
66
116
92
91
74
93
80
66
91
135