Priority Scan - Uniden UBCD996T Owner's Manual

g Q
[MENU]
Srch/CloCall Opt
Adjust P25 Level
Q
— The automatic adjust feature is enabled.
Auto
— you can set the threshold manuals depending on your circumstances.
Manual
— sets the factory default value.
Default

Priority Scan

If you activate a Priority Scan while scanning, the radio interrupts its scan every two
seconds to check the priority channel (P-Ch).
There are two ways to set Priority Scan.
1. Press [PRI] to set one of the following Priority Scan levels in Scan / Scan Hold
mode.
— Normal scanning. The scanner provides no special treatment for Priority
Off
Channels.
— The scanner scans all unlocked channels and also checks those designated
On
as Priority. While scanning a conventional system, the scanner interrupts every 2
seconds and checks the priority channels in each unlocked conventional system.
Priority channels in lower priority key numbered systems (starting from 1) have
highest priority. appears when you select this mode.
PRI
— The scanner only scans priority channels in unlocked conventional
Plus On
systems. flashes when you select this mode.
PRI
2. You can choose how the scanner treats Priority Channels using the Menu
options.
g Q
[MENU]
Set Priority
Choose
Off, On,
Q
g
g
PRI
g
g
or
Plus On
110
appears on the screen.