Scanning Memory Banks; Locking/Unlocking Memories; Using Priority Scan - Uniden UBC330CRS Owner's Manual

HOLD icon. Then, select a memory by pressing or to go to the memory or
s t
HOLD
input the memory number then press .

Scanning Memory Banks

SCAN
To scan the memories you have programmed, press . The scanner scans
all unlocked programmed memories in enabled memory banks, stopping on
a memory when it detects a transmission. To turn on/off memory banks while
scanning, press the number button that corresponds to the memory bank you
want to enable or disable.

Locking/Unlocking Memories

You can lock memories so that they are not scanned, even if their bank is turned
L/O
on. Simply press when the scanner stops on a transmission on the frequency
L/O
L/O
or manually select the memory, then press . The scanner turns on the
icon when it is set to a memory that is locked out.
L/O
To unlock a memory, manually select the memory, then press . The scanner turns
L/O
off the icon and includes the memory when scanning its bank.
L/O
To unlock all memories, press and hold for 2 seconds, the scanner beeps
L/O
twice and the icon disappears.

Using Priority Scan

You can set one memory in each bank as a priority memory. If you turn on the
Priority feature, the scanner will check the priority memories in enabled banks
every 2 seconds, even if it has stopped on a transmission on another memory.
To set the memory in a bank to be the priority memory, manually select the
E/PGM
memory then, while holding on the memory, press to put the scanner
PRI
in program mode and press . The scanner turns on the PRI icon when it is
stopped on a memory designated as priority.
PRI
To turn on Priority Scan, press while the scanner is scanning or holding
on a memory (but not in program mode). You will notice a short break in audio
every 2 seconds as the scanner checks the enabled priority memories. If there
is a transmission on a priority memory, the scanner will immediately tune to that
memory.
Using the Scanner Memories
22