Setting The Audio Type; Selecting Ctcss/Dcs Tones - Uniden UBCD996T Owner's Manual

Q
Select a channel group
g
Edit Channel
Q
g
Select the channel
Q
g
Edit TGID
Q
To edit the Talk Group ID, enter the Talk Group ID you want using the number keys.
Then press .

Setting the Audio Type

For each channel, you can select the audio type that the channel receives.
g
[MENU]
Program System
Q g
Select the system
Q
Edit Group
Q
Select the channel group
Q g
Edit Channel
Q
Select an existing channel
g
Set Audio Type
Q
Select from
All, Digital Only, Analog Only
— The scanner automatically determines whether the audio is analog or digital.
All
— The scanner only remains on the channel if it is carrying APCO
Digital Only
25 digital audio
— The scanner only remains on the channel if it is carrying analog
Analog Only
audio.
If you are programming a conventional system and select Analog Only, the scanner
prompts you to select the CTCSS/DCS tone setting. See the next section.

Selecting CTCSS/DCS Tones

To program a channel with a CTCSS or DCS setting, your conventional system
audio must be set to Analog Only first.
g
[MENU]
Program System
g
Select the system
Q
g
Edit Group
Q
Select the channel group
Q
g
Edit Channel
Q
g
Select the channel
Q
g
g
g
g
g
g
87
MECL
g
C