Uniden UBCD996T Owner's Manual page 82

— You only need to enter control channel frequencies.
On
— You must enter all voice and control channel frequencies.
Off
Note: The scanner defaults to
Setting Site Location Information
g
[MENU]
Program System
Q
Select a trunked system
Q
Edit Site (current)
Q g
Select a site
Q
Set LocationInfo
This setting control whether the system is automatically enabled and disabled when
you connect a GPS to the scanner.
— Enter the system's latitude using the format you selected in the
Set Latitude
system settings.
— Enter the system's longitude using the format you selected in
Set Longitude
the system settings.
— Set the system's range using the units you selected in the system
Set Range
settings.
— Depending on the data received from the GPS, the L/O status
Set GPS Enable
of the site is automatically controlled.
Adjust P25 Level
g
[MENU]
Program System
Select a trunked system
Q
Edit Site (current)
Q
g
Select a site
Q
Adjust P25 Level
Q
This setting determines some site-specific parameters for digital channels. In most
cases, setting this to
Auto
manually set the digital decode threshold. This setting affects all channels in the
current site. See " Optimizing P25 Performance" on Page52.
.
On
g
g
g
g
g
g
g
g
provides the best performance. However, you can also
82
MESL
MEL