Setting Air Band Step; Setting Record; Priority Scan - Uniden UBC800XLT Owner's Manual

UB356ZH.fm Page 103 Wednesday, December 19, 2007 11:28 AM

Setting Air Band Step

[MENU]
Srch/CloCall Opt
Air Band Step
Select Air Band Step
8.33kHz
12.5kHz

Setting Record

You can set the REC jack to provide an audio signal to a sound recording device
(tape, PC, flash memory) for live recording of transmissions. This also lets you
record Quick Search and Close Call transmissions.
[MENU]
Srch/CloCall Opt
Set Record
On — enables an output to an audio recorder at the REC (record output) jack.
Off — disables an audio signal at the output jack.

Priority Scan

If you activate a Priority Scan while scanning, the radio interrupts its scan every
two seconds to check the priority channel (P-Ch). PRI appears on the screen.
There are two ways to set Priority Scan.
1. Press [PRI] to set one of the following Priority Scan levels in Scan / Scan Hold
mode.
Off — Normal scanning. The scanner provides no special treatment for Priority
Channels.
On — The scanner scans all unlocked channels and also checks those designated
as Priority. While scanning the scanner interrupts every 2 seconds and checks the
priority channels in each unlocked conventional system. Priority channels in lower
priority key numbered systems (starting from 1) have highest priority. PRI appears
when you select this mode.
F
F
F
F
Search and Close Call Options
103