Edit Sys Option - Uniden UBCD996T Owner's Manual

Setting the System Hold Time
[MENU]
Program System
Select a conventional system

Edit Sys Option

Set Hold Time
Set how long the scanner will remain scanning on this system before moving to the
next system (up to 255 seconds). Note that the scanner will scan all unlocked
channels at least one time, regardless of the system hold time setting.
Setting ID Scan/ID Search
[MENU]
Program System
Select a system
Edit Sys Option
ID Scan/Search
Sets whether the scanner only stops on talk groups you have programmed in (ID
Scan) or whether the scanner stops on any unlocked channel (ID Search).
Setting Channel Delay Time
[MENU]
Program System
Select a system
Edit Sys Option
Set Delay Time
This setting controls how many seconds the scanner waits after a transmission ends
before resuming scanning. Enter a value from
Notes:
! The default setting is 2 seconds for each system.
This setting applies to all channels within the system.
Setting Data Skip
[MENU]
Program System
Select a Conventional system
Edit Sys Option
Set Data Skip
This setting controls whether the scanner automatically skips channels it identifies
as data. This includes channels with either no audio or a constant-level audio
source. If turned on, the scanner resumes scanning as soon as it detects the data
signal.
[1] to [5] or , then press
Off
70
C
MEL
MELCS
.
C