Gps Display Mode - Uniden UBCD996T Owner's Manual

Q g
Set Range
available for POI's)
For Dangerous Xing, and Dangerous Road Only
The Alert Tone is fixed.
Q
Set Alert Volume
you rotate the Scroll Control
select a volume level. You can also select no sound (Off) or Auto, a level that is the
same setting as your master volume control setting.
For Dangerous Xing and Dangerous Road sites there are two additional settings:
Q g
Set Heading
your present location or, you can select All Range.
For example: If the Dangerous Road
driving in that direction, then choose
If you know you will be driving a course which is not a fairly straight line to that site,
choose which will trigger the alert regardless of direction as long as the
All Range
other requirements (range, speed) are met.
If you travel in a Northeast direction and do not travel either side of a northeast line
by up to 22 degrees, the alert system will function.
Q
Set Speed Limit
the equivalent in KPH for metric usage.

GPS Display Mode

If you press [GPS] , the scanner switches to a GPS display mode. In this mode, you
can see location information as well as information about your position relative to the
selected POI. The third line of the screen shows
Rotate the Scroll Control
Press ( ) + [GPS]
Input how far away the alert sounds for the site (only
g
select from 15 sound levels, plus Auto and Off. As
the Alert tone is played louder and louder. Press
You can input the compass direction to the site from
location is toward the Northeast and you are
NE (45°)
g
Choose from 0, through 100 MPH in 5 PHM steps or
to select different POI's.
to toggle the Display mode in order.
122
if no POI is selected.
Off
to