Holding On A System; Holding On A Channel; Quickly Storing An Id During Id Search; Quick-Storing Channels Or Talk Group Id's (Tgid) - Uniden UBCD996T Owner's Manual

! ID Search — the scanner stops on any unlocked talk group that becomes active.
To toggle between ID Scan and ID Search, press
while the scanner is scanning the system.
If the scanner does not scan the system long enough for you to easily do this, press
and rotate the Scroll Control to select the changed system. Then, press
[SCAN/SEARCH] within 2 seconds.

Holding On a System

To temporarily hold on a system, tap the
system, tap the Scroll Control
Normal scanning resumes 2 seconds after your last selection.
To permanently hold on a site or system, press and hold the
seconds. flashes in the display's upper left corner. The scanner continues to scan
only the current system. To hold on a different site or system, rotate the
Control to select the new site or system then press

Holding On a Channel

To hold on a channel, press
a different channel, turn the
the current system, the scanner selects channels in the previous or next system. To
resume scanning, press

Quickly Storing an ID During ID Search

To quickly store an active talk group ID during ID search, press
Quick TGID Save?
To save the ID into a channel, press [E
you press [E ] , the scanner stores the ID into a channel group called
YES
in the current system.
Grp

Quick-Storing Channels or Talk Group ID's (TGID)

1. Hold on an existing channel in any system.
2. Enter the frequency or talk group ID you want to store (press twice to enter
hyphens in talk group ID's).
3. To quick-store the channel or talk group ID, press
Otherwise, press [.No]
Scroll Control
then rotate the control to select the system.
[HOLD/RESUME] while the channel is active. To select
Scroll Control . If you scroll past the beginning or end of
[SCAN/SEARCH] .
.
49
then press [SCAN/SEARCH]
. To hold on a different
Scroll Control for 2
Scroll
[E ] .
YES
[E ] . You see:
YES
. Otherwise, press [.No]
]
YES
Qck Save
[E ] .
YES
. If