Programming Channel Groups; Setting Up A Channel Group; Editing A Channel Group Name - Uniden UBCD996T Owner's Manual

— the scanner automatically adjusts the digital decode threshold to match the
Auto
transmission you are hearing when it receives a strong signal and has a high
decode rate.
— lets you manually adjust the digital decode threshold. To manually adjust
Manual
the P25 level, select
Manual
— sets the digital decode threshold to the default value. Use this setting to
Default
return to the value that usually provides adequate performance. This is handy is you
have manually adjusted the value to a setting that prevents proper decoding.
Note: This setting has no effect on how these sites are received.
Deleting Sites
[MENU]
Program System
g
Select a trunked system
Q
Edit Site
Q g
Select a site
Q g
Delete Site
Q g
Confirm Delete?
Yes="E" / No= "."
Deleted sites cannot be restored. You must re-enter them.
Important:

Programming Channel Groups

Setting Up a Channel Group

g
[MENU]
Program System
g
Select a system
Q
g
Edit Group
Q
New Group
Q
The scanner creates a group with a default name of
for each new group you create within a system.

Editing a Channel Group Name

g
[MENU]
Program System
g
Select a system
Q
Edit Group
Q g
Select a Group
Q g
Edit Name
Q g
.
g
g
g
Group n. n
g
83
ME
MECL
MECL
increments by one
MECL