Close Call Only Mode; Close Call Do Not Disturb Mode; Priority Scan Mode - Uniden UBCD396XT Owner's Manual

DND (do-notdisturb) mode, the scanner only interrupts if it is not already receiving
audio.
To enter Close Call mode, FUNCTION + repeatedly tap HOLD until Close Call
Pri appears.
The Close Call icon appears for Close Call Priority mode and is in reverse colors
for Close Call DND mode.

Close Call Only mode

The scanner stops the current operation and only performs Close Call checks as
described above.
To enter Close Call only mode, FUNCTION + press & hold HOLD.

Close Call Do Not Disturb mode

When set in this mode, the scanner will periodically make Close Call checks
whenever the scanner is not receiving audio in another mode. This eliminates the
annoying breaks in conversation while still allowing for the Close Call
functionality. In Close Call Do Not Disturb mode, the Close Call icon appears in
reversed color.
To enter Close Call Do Not Disturb mode, FUNCTION + repeatedly press HOLD
until Close Call DND appears.

Priority Scan mode

At a specified interval, the scanner interrupts its current operation, checks the
userdesignated conventional priority channels, and then resumes the previous
operation. You can set the interval for priority scan checks.
To enter Priority Scan mode:
1. Enter Hold mode.
2. FUNCTION + tap NO.
If no conventional channels in enabled and unlocked systems are designated as
priority, the scanner will display Priority Scan No Channel.
For trunked priority channels, you need to enable priority scanning in the system
option menu as well as tagging the channel as priority. Trunked priority only
UBCD396XT
9