Table of Contents
Advertisement
Device List Panel — Lists the devices and folders in Live and Emulate mode. From
6
this panel, devices can be clicked and dragged into folders, placed in custom order, and
folders can be renamed. If the device is connected via LAN, the device IP is displayed.
Double-clicking a device in this list will initiate a pull (see
in Live Mode
The color of the icon next to a device name indicates Live or Emulate status, as well as
whether the device is configured as a Primary or Secondary EXP device. Devices with
color icons are in Live mode. Devices with grayed icons are in Emulate mode. Devices
with blue icons are configured as Secondary units (see
Managing Devices in Device Manager
To add a device:
1.
Click
Tools > Device Manager
2.
Click the
Figure 103.
3.
From the DSP Configurator splash screen drop-down, select the device to be added
to Device Manager (see figure 104,
device...
DSP Configurator performs a pull of the newly connected device configuration.
4.
Click
OK
Figure 104.
To arrange devices into a folder:
1.
From the
on the following page).
2.
Enter a name for the folder. The text for the folder name is automatically highlighted and
ready to be edited (
NOTE: Folders can be renamed later by clicking twice on the folder name and
editing the text.
on page 17).
to open the
button (see figure 103,
Add Device
Adding a Device
dialog box and directly connect with a device. When connecting directly,
(
).
3
Selecting a Device to be Added
dialog box, click the
Device Manager
).
2
Connect to a XMP 240 C AT
Expansion Bus
dialog box.
Device Manager
).
1
). Select
to open the
2
Connect...
button (see
New Folder
XMP 240 C AT • Configuration Tools
on page 88).
Connect to
figure
105,
1
77
Advertisement
Table of Contents
